You are hereHow to ScrOG (Screen of Green) Your Marijuana Plants
How to ScrOG (Screen of Green) Your Marijuana Plants
by Nebula Haze
For those who might not be familiar, the term "ScrOG" (Screen of Green) refers to a marijuana growing technique that uses a net or wire mesh to control the height of the plant.
If you hear or read growers refer to "SCROGing," "scrogging" or "scroggin" a plant, this is what they are talking about.
To add another confusing term into the mix, SOG (Sea of Green) is something totally different, and involves growing dozens or hundreds of very short plants.
The "screen" is a wire mesh, string or nylon netting, which is put up between the plants and the lights. This controls the growth of marijuana plants so they tend to grow in neat rows of big colas, as pictured above.
What you need for ScrOG:
Female marijuana plants (seedlings from feminized seeds or female clones)
Screen - usually made with wood crisscrossed with string or wire (string works best, then twine/hemp cord, plastic fencing, and finally chicken wire / fishing line)
View LBH's Scrog tutorial for more information on how to build your own Scrog Screen: http://growweedeasy.com/lbh-scrog-tutorial
Growing supplies for your regular method of growing
Why Only Feminized Seeds or Clones?
The benefit of this method is that you make the most use of your grow lights by training your plants during the vegetative stage to make a lush screen of green.
Therefore, this method doesn't work well with with regular or unfeminized marijuana seeds, where half of all the plants will end up being males that must be removed.
Because you cannot tell if a marijuana plant is a boy or girl until the flowering stage, any male plants that are removed will leaves "holes" where the males were in your lush garden, majorly reducing the overall effectiveness of this method.
The plants are trained around the netting, and cannot be easily re-arranged once they've started training themselves around the net,
This is why it's recommended to only use this method with feminized seeds or clones from a known female plant.
Make sure each plant has at least 1 foot (0.3 m) between plants. You want to allow room for the plants to "bush out." Screen of green is great for maximizing yields per the amount of plants, since it grows short, bushy marijuana plants.
In ScrOG, you generally keep plants in the vegetative stage until plants have "filled up" the entire mesh area with green, like this:
If you see parts of the plant poking through the screen, simply bend them gently back under the screen, or tie them down with wire,
The idea is to manually train the plant to grow a nice even canopy of green, so that when you start flowering the buds grow up in even rows that make maximum use of the grow lights.
Learn more about low stress training and other Vegetative Stage growth control methods to help you prepare for ScrOG here:
Continue to keep plants below the screen using low stress training methods like bending, until about 2 weeks into the flowering stage.
At this point, it's okay to let colas start to peek through the screen. Try to train the tallest colas to grow towards the edges, outside of the light's range, and attempt to keep the colas directly under the light as short as possible.
At the very least, make sure you don't have any tall colas growing directly under the light.
This helps maximize light distribution while preventing colas under the grow light from getting burned.
Make sure that growing buds get access to direct light by pushing fan leaves down under the screen or removing fan leaves altogether (using proper defoliation principles).
The buds will begin to grow above the screen, forming a beautifully even carpet of marijuana colas.
Photo Credit to Raquel12771
The Screen of Green method works incredibly well with other marijuana growth control techniques:
Still want to learn more about ScrOG?
View LBH's ultimate Scrog tutorial:
ScrOG vs Defoliation
Learn about marijuana defoliation as a growth control technique here:
Recently, a reader wrote in to say:
Hi, the area I grow in height is an issue! So ideally the shorter the better.
I read an article about scrogging your plants and It made me think, what a great way to get a nice area of even growth without growing them too tall, which is what I want.
THEN I read your article about defoliation and how it can produce more buds throughout the plant even the lower areas maximising the plants potential, yet the article about scrogging tells you to lollipop the growth underneath.
Trouble is I've already set up the mesh for scrogging the cuttings are about 10 inch tall and just poking through the mesh.
Have I made the wrong choice with SCROG? Would I need to take the mesh down, or could I just continue to let it grow through and still defoliate.
Look forward to hearing your advice.
Answer: ScrOG and defoliation can be used together. In fact, they work perfectly to maximize the benefits of each method.
Just make sure that you are also bending and twisting your marijuana plants. The net is a helpful tool, but it's still up to you to help train the plants to grow evenly under the net during the vegetative stage. I hope today's tutorial helps you out!
And here's a note from a reader who has been able to harvest nearly a pound of buds per plant using the ScrOG method.
He explains his methods in detail:
Hello Nebula and Sirius,
I grow 2 plants in a 7 foot by 9 foot grow room. There are two 4 foot by four foot scrogs, (one for each plant), set up in the center of that room and I have 1675 watts of light over each scrog. The plants are both grown in their own bubbleponics system I regularly harvest very close to or more than 1 and 3/4 pounds from two plants using this method.
I am with my plants approximately 1 hour every morning right after the lights come on, and one hour every evening about 2 hours before the lights go out.
I bend and twist the plant to try to fill each of the 256 openings I have in each scrog with a bud growing up and out of each of the 256 openings. So far the furthest I've gotten, is to fill about 200 of the 256 openings with a bud site in each opening.
I've grown the same strain from seed, for about the last 3 or 4 grows now and with experience have figured out just when to turn lights to 12/12 for flowering so I get the right amount of stretch in the plants before harvest thus filling as many of the 256 scrog openings as possible with a bud site.
I'm now trying your defoliation technique too. Since I train my plants with bend and twist I usually don't have a shade problem that causes me to use your defoliation technique, rather, I use it to get rid of any unneeded growth so the plant is not wasting precious energy and nutrients to grow a lot of leaves that aren't needed and instead puts it's energy and nutrients toward growing a monster plant with many, many, many bud sites on it.
I've been using Technaflora brand nutrients since I started and I am on my 8th crop. Each crop takes me about 5 months from start to finish. I have always used the Technaflora brand nutrients and I've always used them at the strength that Technaflora suggests both in veg and flower.
This is likely all old news to you but just thought I would tell you my story and what nutrients I use after having read the nutrient part of your newsletter.
I hope that helps you as much as it would have helped me when I started growing!
If you haven't started growing marijuana yet, today is the day!
Our one-of-a-kind 2-page Stealth Growers Cheat Sheet will teach you everything you need to know to discretely start growing a few pounds of marijuana a year, out of a spare closet.
Click here to learn how to grow weed and download your cheat sheet: http://growweedeasy.com/learn-how-to-grow-weed
If you run into any problems while you're growing marijuana, you don't have to figure everything out alone. Use our handy Plant Doctor tool to get professionally diagnosed by the Grow Weed Easy plant doctors: http://growweedeasy.com/plant-doctor
Wondering where to buy marijuana seeds? There's lot of choices, but learn about the marijuana seed bank I recommend here: http://www.growweedeasy.com/seeds
About Nebula Haze
Nebula Haze founded GrowWeedEasy.com in 2010 after growing her own medical marijuana for 6 years in the California Bay Area. She has published dozens of growing articles in print and online and is dedicated to showing others how easy it is to grow marijuana indoors.
Wanna "steal" this article?
Here at GrowWeedEasy.com, we are dedicated to getting this information into as many hands as possible. You are welcome to republish this entire article as long as you do not edit, remove or or otherwise change any part of it without permission.
Please don't hesitate to Contact GrowWeedEasy.com with any questions.