Bigger Buds with Nebula’s Easy Manifold (Cannabis Main-Lining Tutorial)

Last updated Jan 13, 2024

by Nebula Haze


Table of Contents

Intro: What is “Main-Lining” Cannabis?

Ultra-Quick Guide to Building a Manifold

Tips & Hints for an Easy Manifold


What is “Main-Lining” Cannabis?

The cannabis “main-lining” grow technique is the process of building a “manifold” on a cannabis seedling to form bigger buds and increase yields in the flowering stage. It was originally described by a talented marijuana grower named Nugbuckets who gave it the name main-lining. Nugbuckets generously gave us permission to share his easy manifolding weed growing technique on GrowWeedEasy.com.

A “manifold” means all branches come from a single point at the base of the plant. This happens when the plant’s one main stem is turned into two main stems at a young age (full instructions below).

A cannabis plant with a manifold - this tutorial about main-lining your marijuana will teach you how to make your own manifold to increase yields indoors

This results is an orderly plant with multiple thick, long buds in the flowering stage. Today’s easy manifold tutorial will show you how to copy these results in your cannabis garden.

Example of a trained (manifolded) marijuana plant that has many colas

Here’s that cannabis plant at harvest with arm-sized buds.

You can barely see my hand under there.

Main-lining vs Manifolding – They are exactly the same thing, just two words for building a cannabis manifold. I call it manifolding, but many growers use the word “main-lining” since that is what Nugbuckets originally called this training technique. However, the term main-lining can mean something unsavory, so I personally choose to use the term “manifolding” when describing the technique of making a manifold.

Original example of marijuana manifolding / mainlining by Nugbuckets.

8-headed cannabis plant from side was created by building a manifold - This marijuana manifold picture was taken by Nugbuckets

No matter what you call it, we experimented with his technique for growing cannabis indoors for several years. Over time, we slightly altered the original manifolding process by Nugbuckets. This modification increases yields and saves time (you get to harvest sooner), but at its core the idea is the same.

A cannabis “manifold” is simply a plant where the main stem was split evenly in two when the plant was young by cutting off the top of the plant. The grower then does a few more cuts in a specific order as the young plant grows. There is nothing magical about this technique. It’s just a way to train the plant to grow, and it works well for simultaneously breaking apical dominance (tendency to grow just one main stem) while creating many big colas/bud sites without much effort.

To form the base of a “manifold,” the main stem of a young cannabis plant is split in two by cutting off the top of the plant and removing all side stems except two main ones.

Young vegging cannabis plant with 2 main colas after being LST'ed with plant twisty tie

When the plant is split this way, it completely destroys the “apical dominance” or the tendency of the plant to focus mostly on its one main stem. With your plant’s apical dominance broken, it tends to make many long and thick buds sites (colas), instead of just one big central bud.

After the base of the manifold has been created, the grower uses it to create several bud sites on each side. As the cannabis plant grows out, this structure results in several evenly sized main “colas” (or main stems where buds form). This is opposed to a naturally grown marijuana plant, which will usually produce just one main cola indoors.

Cannabis plants branch out heavily after being manifolded, making many main bud sites.

These two manifolded marijuana plants have been main-lined to produce many main colas

Indoors, the manifold technique can be used to increase your yields by giving you a “canopy” of fat buds. You will get the greatest increase in yields if you’ve had trouble in the past as far as filling your grow space with many buds. Below you can see the above plants with a cannabis manifold grown out – there are many huge buds under the grow lights instead of just one or two like with a standard cannabis plant.

When manifolded cannabis plants are allowed to get tall, they create very long thick colas

In the Nebula manifold method, we keep ALL the colas that will produce big buds. These plants still have several weeks until harvest to fatten up further.

These two main-lined cannabis plants have grown long thick buds

Unlike with Nugbuckets’ original method, we keep all the big bud sites (“colas”) that reach the top of the plant. This results in bigger overall yields than just keeping the original 8 colas recommended by Nugbuckets. Another difference is that you do one less cut, which saved recovery time without lowering yields in our experiments.

The Nebula manifold method also saves you 1-2 weeks of training in the vegetative stage compared to the original technique, so you get to harvest sooner!

Because of the shorter training process, these plants made it to harvest just 4 months from seed, yielding about 11 ounces in total!

The Nebula Manifold tutorial keeps more "tops" or colas than the original tutorial by Nugbuckets. This results in bigger overall yields!

Does manifolding work on short plants? Since the Nebula manifold saves you an extra week or two in the vegetative stage, it is suitable for shorter/smaller plants than the original Nugbuckets main-lining method. If you follow the instructions in this tutorial, a cannabis plant can be effectively manifolded as long as it has room to grow at least 2 feet tall.

I trained this plant according to this tutorial and was able to harvest 6.2 ounces on a single 2 foot tall plant!

Follow this cannabis manifold tutorial to increase your marijuana yields indoors. This is done by creating many huge buds, like this in this picture.

Manifolding needs to create long colas to be effective, and very short plants can’t do that. If the final plant is shorter than 2 feet, the manifold technique won’t be as good at increasing yields since you’re not playing on its strengths.

Along the same lines, a manifolded plant also needs to be grown under a powerful grow light like modern LEDs, MH/HPS bulbs or an LEC (also known as a CMH). More powerful lights means that the buds will get filled out all the way down, instead of just at the tops. Because of that, unfortunately manifolding doesn’t work well for growing short plants growing under fluorescent grow lights, but that’s what topping is made for!

This manifold tutorial gives you step-by-step instructions on the process of manifolding cannabis the Nebula way to get more buds and bigger yields. If you follow the steps and instructions exactly as written, it’s almost impossible to mess up. Think of it like a recipe, but it’s a recipe for plant training.

 

Why build a manifold when growing cannabis indoors?

  • Big Yields – The main reason I use main-lining to build a cannabis manifold is because this training technique results in big yields from any indoor grow setup. By building a manifold in the early vegetative stage, you can get an extra 40% or more yields compared to not training your plants. I’ve used several other types of cannabis plant training techniques, and main-lining cannabis is a consistent way to get great yields every time. It takes some of the best elements of all the other techniques, and combines them into one step-by-step process that’s hard to mess up if you follow the instructions. No more guesswork.
  • Simpler than Other Training Methods – Because you can follow each step word-for-word, without having to make any judgment calls of your own, it’s difficult to mess up. In this manifold tutorial, the basic idea of main-lining cannabis is to simply cut the plant a few times in a certain way, over the course of a few weeks. Then you just arrange the buds where you want using twisty tie. Each of the colas tends to grow about the same height as each other, which makes it straightforward to get a “sea of colas” that are each thick and dense, without a lot of popcorn or larfy buds. There’s nothing you have to do to make this technique work for you, or customize it to your setup.
  • Less Time Spent Training – Since you just top the plant a few times and place buds, it really doesn’t take much time to get marijuana plants to become a desirable shape with lots of colas indoors. Some training methods can create similar shapes and canopies, such as ScrOG (using a net), but training plants to weave through a net can take up to an hour a night during the intense process of filling the net in the late vegetative stage. Conversely, manifolding only takes a few minutes for the first few weeks of the vegetative stage, then basically no more training is needed besides holding up heavy colas late in the flowering stage.
  • Training is Over Early in the Plant’s Life – Since all the training happens in the first few weeks of the plant’s life, you’re pretty much done with training early on. Once I’ve finished my manifold, I know I’m past the “hard part” of training, and can spend the rest of my time focusing on caring for my plants, instead of getting frustrated about trying to control their shape and size.
  • Less Likely to Get Bud Rot or Mold – Manifolding cannabis builds a support structure for many colas that are thick and uniform, but not overly fat. This reduces the chance of getting bud rot or other types of mold. When a cannabis plant grows naturally with one main cola/bud under very powerful grow lights, the cola can get too thick and increase the risk of developing bud rot (when the inside of the buds simply start rotting away) or developing mold during the drying and curing process. While the manifolding method produces many big thick colas, the plant spreads the energy more evenly between them so none of the colas will get to the point where the grower simply can’t maintain them properly.
  • Less Time Spent Trimming – Cannabis buds need to be trimmed before they’re ready to smoke. With only long, dense colas and no airy small cannabis buds to trim, the process of trimming your buds after harvest goes by much faster than working on lots more smaller nugs. Your hands will thank you 🙂
  • Buds Dry More Evenly – Since all the buds are a similar width and density, drying is a lot more straightforward. All the buds tend to be done drying at the same time.
  • Impressive Bud Appearance – While big and small buds are essentially the same when it comes to potency, many growers prefer the appearance of large dense buds, which is what you’ll produce on a manifolded plant.

Manifolded cannabis buds tend to be beefy

 


 

What’s the Difference Between the “Old” Way and the “New” Way?

You can build a cannabis manifold the “old way” (the way Nugbuckets did it) and split everything completely evenly like this:

Manifold of a main-lined cannabis plant

In the original technique, each main stem is the same number of “steps” from the base of the plant, which helps the plant deliver resources more easily. But in order to achieve this perfectly symmetrical shape a grower needs to cut and prune the plant 3 times, waiting a week or more in between each pruning session. That can add several weeks to the cannabis vegetative stage because each time you prune, you’re losing a lot of the growth built up by your plant.

Or… You can skip all that wasted time and build a marijuana manifold the way Nebula does it in this manifold tutorial! The Nebula manifold doesn’t look quite as even and symmetrical but will get you identical results in less time, with less wasted growth. This process is not fundamentally different in any way; it is basically the same principle but modified slightly for improved results.

In our experiments, the results are the same with a “modified” manifold, but you save time.

An example of a cannabis plant with a "Nebula" manifold. This manifold tutorial will teach you how to grow marijuana just like this!

Even when the plant isn’t centered, the Nebula manifold technique works perfectly, it works great in most setups and with just about any plant.

This cannabis has been manifolded using Nebula's technique, which takes out an extra step compared to the main-lining tutorial by Nugbuckets

Note: There are four times when it is not a good idea to manifold your cannabis:

When NOT to Manifold Your Cannabis 

  1. Auto-Flowering Strains – It’s difficult to manifold auto-flowering plants because they only give you a few weeks before they start making buds. Stick to standard/photoperiod cannabis strains for the best results with manifolding.
  2. Weak Grow Lights – For this technique, you want an MH/HPS, LEC, or 150W+ LED grow light. Manifolding doesn’t work well for increasing yields on plants under small grow lights with poor penetration, like fluorescent lights or small LEDs. Plants grown under smaller lights won’t get good results with manifolding, and you may even hurt their yields with all the chopping and removal of leaves and growth. Smaller grow lights don’t have the penetration to take advantage of the manifolding structure. For smaller lights, standard topping is a much more suitable technique that produces similar results.
  3. Short Grow Space  – Manifolded plants need to be allowed to grow to at least two feet tall for the best results since manifolding makes long dense colas. If you don’t have that much height available for your plant to spread out in your grow space, you might consider other cannabis training methods instead, since these techniques are more suited to shorter grow spaces.
  4. Unhealthy Plant – Never start main-lining a cannabis plant that isn’t already healthy and growing fast. For an unhealthy cannabis plant, the main-lining process will slow growth even more and may stunt the plant.

Nebula’s “modified” manifold technique saves an extra step (saving you 1-2 weeks of growth in the vegetative stage) compared to the manifold technique by Nugbuckets, and in our experiments the results are identical.

Here is a video of what main-lining and building a manifold can do for you.

Two main-lined cannabis plants just before harvest

This technique of building a manifold at the base of cannabis plants has been adopted by many marijuana growers in dozens of different grow setups, and it’s not always done the same way. The following steps do not describe the process exactly how Nugbuckets does it, but I’ve had identical results with main-lining cannabis this way and it saves time compared to his original steps. Many growers have asked me for a quick, concise manifolding tutorial, so here it is!

This is the super condensed version for main-lining cannabis indoors, exactly as I do it now (after some trial and error). The complete tutorial with pictures and notes is below!

Ultra Quick Guide to Building a Manifold

What You Need to Start Main-Lining Cannabis

  • Healthy, fast-growing cannabis seedling
  • Sharp scissors
  • Plant ties (and possibly Soft Wire Ties)
  • Plant yo-yos (or “yoyo supports”) – although you won’t need these to start, you’re probably going to need these to hold up all your tall, heavy colas when they start falling over from their own weight in the flowering stage!

To secure plants, we use a mix of plant ties, soft wire ties, and yo-yo supports

Plant Ties – young plants
Plant ties are made of thin wire with a plastic coating on the outside. They tend to be more flimsy and don’t have a lot of strength. They are very gentle on young plants.

Soft Wire Ties – to anchor stronger stems
Soft wire ties are made of a thicker wire, with a very soft coating. These are much stronger than regular plant ties, but they will not give way to a strong stem yet will still never cut into the plant. These can be used in situations where strength is needed to hold down a thick unruly cola that wants to grow in the wrong direction. They can also be used as sturdy anchors, with the plant ties above used as “string.”

Plant Yo-Yos – when colas start fattening so much they fall over
In the flowering stage, it’s common for your buds to start falling over from their own weight. Plant yo-yos can be hung conveniently from the top of your grow tent or grow space, and the special hooks at the bottom are ideal to hold onto thick colas without causing any damage to your buds.

 

 

Main-Lining Cannabis Indoors
Nebula’s Step-By-Step Tutorial for a Wide-Based Indoor Cannabis Plant

Quick Reference Picture – Main-Lining Cannabis Diagram

How to build a cannabis manifold diagram - This main-lining cannabis step-by-step tutorial teaches you how to manifold your marijuana plants!

 

1.) Create “Base”

  • Let young plant grow 6 nodes
  • Top to 3rd node and clean all extra growth except top 2 growth tips and their fan leaves
  • Now you have 2 main colas – these form the “base” of your cannabis manifold

2.) Create 8 main colas

  • Let each side grow 4 nodes
  • Top to 3rd node on each side
  • Instead of cleaning all other growth like in the last step, just remove all the growth from the 2nd node on each side, leaving growth from node 1 & 3 on each side
  • Now you have 8 colas!

3.) Vegetative Stage

  • In addition to regular plant care, specifically check plants at least twice a week to make sure everything is growing flat like a table. Older stems start getting hard and woody and are more difficult to train, so if you check plants at least twice a week you’ll be able to bend stems while they’re still young and flexible. Getting used to checking on your plants regularly is a great habit that will serve you well in your cannabis growing adventures!
  • Try to fill every “space” under the grow light with colas that are a few inches away from each other, and all the same height. If at any point you can see a cola is growing taller than the others, gently bend it down and away from other colas.
  • Use twisty tie to secure stems so everything stays in place, otherwise your stems will turn back up overnight!
  • Keeping up with  this process throughout the vegetative stage gives you a flat, even canopy with many evenly spaced bud sites.

4.) Flowering Stage

  • Switch to the flowering stage when the plant has reached half the final desired height.
  • Continue to arrange colas to fill up your space under the light for first 2-3 weeks after the flip to 12/12.
  • If any colas are growing much taller than the others, make sure to bend them down and away during the first few weeks, securing them just like before. This is especially important for colas growing directly under the grow light since they are most likely to grow too close to the light and get burned!
  • That’s pretty much it!

Now you just wait for big fat colas to form under your grow lights! 

These fat, even colas are the result of main-lining - Tutorial by Nugbuckets

 

Important & Helpful Definitions

  • Node – A node is a place where a fan leaf attaches to the stem. With seedlings, it’s almost always a pair of leaves, though with clones you may see just one leaf at the node. In this manifold tutorial we’re only dealing with seedlings, so when talking about the “3rd node” for example, it means the 3rd pair of leaves from the base. A fan leaf has serrated edges, so don’t count the first two round cotyledon leaves when counting nodes.

What is a "node" on a marijuana plant? It's where a fan leaf meets the stem. It's a place growth tips, almost always nestled in the elbow of 2 fan leaves. You will be using nodes to help you manifold your cannabis plant in this tutorial.

  • Growth tip – a part of the plant that is growing new stems and leaves. When a growth tip is exposed to light and air, it will start growing. If the growth tip grows tall enough to reach the top of the plant, it’s often called a “cola” or “top”

Growth tips (known officially as axillary buds) are where new stems are forms, each growth tip can be grown into a cola of its own!

  • Cola – sometimes called a “top” a cola is basically a stem with VIP status. Essentially, a cola is a main stem with a growth tip that has reached the top of the plant. The reason they get a special name is because in the flowering stage, it’s the colas that grow the biggest buds. The goal of main-lining is to end up with many evenly spaced colas on your plant, so you get to harvest many big buds!

Definition of cannabis "cola" - A cola is basically a growth tip that has reached the top of the plant. The reason they have a special name is because colas form the biggest buds!

  • Topping – To “top” a cannabis plant means to cut off a growth tip. You can cut near the end of a stem, or further down. In this article, you top plants right above certain nodes.

The definition of "topping" is the act of cutting of the top of a stem on a cannabis plant. Topping is an important part of building a cannabis manifold!

How to Build a Cannabis Manifold – Step-By-Step Tutorial

 

1.) Create “Base” – Wait until the plant grows 5-6 nodes, top down to the 3rd, then clean all extra growth

Wait until your plant has grown 5-6 nodes, looks healthy, and is growing vigorously.

Why wait? If you start main-lining too early, you can stunt growth and your plant might take longer to recover through the whole process. A plant that has 6 nodes recovers incredibly quickly from topping, while a plant with less nodes than that can be stunted for weeks from a single topping.

Although it’s optimal to start the manifolding cannabis process when the plant has 5-6 nodes, it’s possible to start a little later. However, the later you start the more time you’ll have wasted in the vegetative stage (and wasted time means wasted money), so you don’t want to start late if you can!

Wait until a marijuana plant has grown 5-6 nodes (pairs of leaves) before you begin the manifold process

The first step to manifold cannabis is to wait until the plant has grown 5-6 nodes (pairs of leaves) like this young cannabis plant in the vegetative stage

Top down to the 3rd node and clean extra growth below it. Basically, you’re just cutting off the tip of the plant, right above the 3rd pair of real (serrated) leaves.

How to top to 3rd node of a marijuana plant - this is the next step to main-lining cannabis to build a manifold

After cutting to the 3rd node, clean off all the vegetation below it. At this point, you only have 2 main stems. You now have created the “base” of your manifold!

This plant immediate after being topped to the 3rd node, with all the extra growth cut away, leaving just the two growth tips on the 3rd node and the adjoining leaves

This plant was topped to the 3rd node, and all the extra growth was cut away. The two growth tips on the 3rd node and the adjoining leaves are the only thing that was left.

 

2.) Create 8 Colas

  • Wait Until Each Side Has Grown 4 Nodes
  • Top to 3rd Node on Each Side
  • Remove All Growth From the 2nd Node, Leaving Just Nodes 1 & 3

In this step, we’re going to wait until the new tops/colas have recovered and look like they’re growing fast. Once each side has grown 4 sets of leaves, you’re ready to go to the next step.

Wait until your marijuana plant has grown 4 nodes (pairs of leaves) on each side.

There are now 4 nodes (pairs of leaves) on each side of the cannabis manifold

In this step, we’re going to wait until the new tops/colas have recovered and look like they’re growing fast. Then we’ll top all the new colas to the 3rd node again. This time instead of cleaning the whole stem below, we will only remove the growth from the 2nd node. This leaves you with the 1st and 3rd node on each side so after this step, you will have 8 main colas.

I think most indoor growers will be happy with 8 colas and the offshoots that grow from them, but if you do want more colas, keep the 2nd node in this step, or continue to top plants and repeat the steps again. For most growers, you want to follow the tutorial exactly, so let’s walk through this together.

Top to the 3rd node on each side (remove tip above 3rd pair of leaves). Be careful to avoid damaging the growth tips while topping the plant!

This moving gif shows how your cannabis plant will look like after it's been topped to the third node. This is the second step in the cannabis manifold tutorial.

There are now 3 nodes on each “branch.” Instead of cleaning everything like the first time, you want to remove the 2nd node on each side, leaving just the 1st and 3rd nodes. You’re almost done!

Same cannabis plant - view from above

Now you have just the 1st and 3rd nodes left. This leaves 4 total nodes on the plant, or 8 total growth tips/tops/colas!

At this point in the cannabis manifold process, you've finally got 8 main colas / stems. The hard part is over!

Why keep node 1 and 3 on each side? The odd-numbered nodes all face the same way, and it’s easier if your 8 colas are all faced in the same direction. That being said, it doesn’t really make much difference which nodes you leave as long as you have 8 growth tips at the end, since you will be training your plant anyway. But if you keep nodes 1 and 3 in this step as the tutorial says, your manifold will look prettier and be just a little easier to train 🙂

 

3.) Vegetative Stage Care

As your manifolded cannabis plant is growing in the vegetative stage, watch to make sure your canopy is staying flat, like a table. Check on plants at least twice a week; it’s really easy to train cannabis plants if you’re checking on them regularly (takes just seconds) but it can be frustrating to try to train plants after their stems have already become hard and woody.

Whenever you’re checking your plants, if any stems appear taller than the others, gently bend them down and away from the center of the plant. Use a bit of twisty tie to secure stems in place so everything stays the same height. Keeping up with this process throughout the vegetative stage gives you a flat, even canopy with many bud sites.

Some of these stems have grown taller than others.

The "skeleton" of this almost fully trained cannabis plant is revealed after the lower growth is removed

Bend taller stems down and away from the center of the plant, securing stems down so they’re all about the same height as each other.

This cannabis plant was lollipopped and the colas were tied down with LST, all in preparation of the switch to the flowering stage. Time for some buds!!!

Notice how all the stems have been bent down so they’re about the same height and spread out.

Side view of that LST'ed plant - all those leaves will be turning up again in just a few hours!

The goal is to arrange most colas around the edges of the plant, with a few colas in the middle so it makes a flat table.

Every time you bend your cannabis plants down, they will turn back up within a day or two, like this.

The Original Amnesia cannabis plant showing off it's 8 colas

Just started the flowering stage - this cannabis plant has a great canopy to support 8 main colas

Not long before the switch to flowering!

Note: To avoid a hydro plant tipping in the net pot like in the above pics (which doesn’t really affect anything as far as growing but doesn’t look pretty), make sure the base of your manifold goes parallel with the length of your tub, instead of perpendicular like the above plant.

 

4.) Switch to the flowering stage

Once your manifolded cannabis plant has reached half the final desired height, it’s time to initiate the flowering/budding stage. You do this by switching the lights to a 12/12 schedule (12 hours light, 12 hours dark each day). Your plant may double in height during the first 3-4 weeks of the flowering stage (known as the flowering stretch) so it’s important to flip to flower while you still have plenty of room left.

For this marijuana manifold tutorial - wait until the plant has reached half the final desired height before switching to the flowering stage

Right before the switch to flowering, give your plant a minimal last cleanup by taking off the big fan leaves, especially in the middle and bottom of the plant. You also want to tuck or remove any really large fan leaves blocking bud sites. Be careful not to damage any growth tips at the base of each leaf.

How many leaves to take off? When in doubt, take fewer leaves than you think you should since you can always come back later!

Give your cannabis plant one last minimal cleanup before the switch to flowering; especially remove large fan leaves.

When you manifold cannabis, you want to give it a last cleaning before the switch to flowering stage. You do this by removing the biggest fan leaves, especially the ones on the bottom and middle of plant

The manifold you created will power the growth of each of your colas through the first few weeks of flowering.

Two main-lined cannabis plants showing off their manifold

By the time it’s 3 weeks after the switch to 12/12, plenty of new buds should be forming.

3 weeks after switching to 12/12

3 week old bud - this growing cannabis plant is in the middle of the defoliation/manifolding process

If the plant is getting bushy, defoliate the plant again around week 3 by removing the bigger fan leaves, and all the lower stuff that’s in major shadow. In general, if you’re unsure defoliate lightly during the flowering stage since you can always take more away but you can’t put leaves back. The plant will stop making new leaves altogether around week 5-6 after the switch to 12/12.

Your cannabis plant is probably bushy and buds have started forming 3-4 weeks after switching to 12/12. At this point, you may want to do another defoliation session by removing most of the biggest fan leaves. Learn more about cannabis defoliation in the flowering stage.

3 weeks after the switch to the cannabis flowering stage, it's time for more more defoliation session if your plant is getting bushy again

These are those cannabis plants after a light defoliation session. I removed big fan leaves, bottom leaves, and any leaves that were covering bud sites (to expose the newly growing buds to direct light).

After a pretty mild defoliation session in week 3 after the initiation of the marijuana flowering stage - part of the manifold process if plants are getting bushy

Learn more about using defoliation for bigger yields

Any buds in shadow won’t fatten up properly, so make sure to keep the lower part of the plant clean so all energy is focused on the top main buds. Remove everything near the bottom of the plant that will never make it to the top canopy, including leaves and “suckers” (small stems and growth tips).

Remove leaves and small stems below the line in this diagram.

Remove all leaves and suckers below the line - pruning your cannabis plant strategically in the flowering stage will increase your yields!

Plants will slow down in vegetative growth around week 3 or 4 into the flowering stage, and by week 6 they will have stopped growing new leaves altogether, and just be focusing on fattening buds. You need to make sure to leave enough healthy leaves to last until harvest time!

Example of a different manifolded plant

3 weeks after switch to 12/12 – Before Defoliation

Example of a cannabis plant 3 weeks into the flowering stage - before defoliation

3 weeks after switch to 12/12 – After Defoliation

Example of a marijuana plant 3 weeks into the flowering stage - after defoliation

39 days into flowering (2.5 weeks later)

This is what that same marijuana plant looks like 39 days into the flowering stage

As the cannabis flowering stage progresses, you may still prune away any small growth underneath that doesn’t get light, as well as big fan leaves that block bud sites and can’t be tucked away. Although defoliation (removing leaves) helps with better light penetration on bushy plants in the flowering stage, it’s important to remember that you can always take more but you can’t put leaves back. After 5-6 weeks of 12/12 your plant won’t really grow any more leaves at all! Be careful of going overboard.

Notice how the bottom of the plant has been cleared of leaves, and most big fan leaves have been removed.

Example of a manifolded marijuana plant - side view. Notice how the bottom has been cleared of stems and leaves. Most fan leaves have been removed.

Just before harvest.

Example of a marijuana plant that has been defoliated - just before harvest time

How much of the manifolded cannabis plant do you keep clean?

All big fan leaves should be removed, but how long you leave each cola depends on the side of your grow light. Bigger grow lights can support longer colas. You want to remove the parts of the plant that will never get access to light, but leave the parts that can take advantage of all the light that does make it down into the plant.

The above plant is under a 250W HPS, which can’t “reach” as far down into the plant as a bigger light. The colas are only about 12″ long because everything below that point was removed because it was in shadow.

The two plants below are under a 600W grow light, which can penetrate two feet into the plant. That is why much more was left on each cola. The parts of the plant that were in shadow were all removed but the remaining buds are still almost 2 feet long. Because the 600W light reaches that far into the plant, these buds will fatten up all the way down.

Basically, clean off parts of the plant that won’t ever get light. Leave the parts of the plant that get direct light.

No more major defoliation after 6 weeks into 12/12. Plant growth slows down around week 4-6 and most strains stop making leaves altogether after week 6-7. You need to make sure to keep enough healthy leaves to last until harvest.

With your well-maintained cannabis plant under a nice grow light, you will be rewarded with long, dense thick colas with huge nuggets of buds! You also get some very chunky buds wherever side stems are exposed to light and air.

Two main-lined cannabis plants just before harvest

Another shot of those two main-lined cannabis plants

Harvest (this is just one of the plants from above!)

Cannabis buds on a stove - immediately after harvest - the marijuana manifold tutorial powered the size of these monsters!

 

Training Tutorial: Get Extra Help Building a Manifold

 

Cannabis Main-Lining: Tips & Hints 

Strain Choice is Important

Matching Cannabis Strains

If you plan to grow more than one strain at a time, it’s a good idea to spend a little extra time thinking about matching genetics that “play well” with each other and that will benefit from having a manifold. When main-lining, it helps to choose strains that are well-matched. Main-lining doesn’t change the nature of the strain and it can be a pain in the butt if you mix a strain that stays short with a strain that tends to grow tall. If you have a strain that tends to stay short, main-lining will help spread out the plant, but it won’t cause the plant to grow the long colas if the strain doesn’t tend to make long colas. Main-lined cannabis plants will grow with the same patterns as normal, just with a manifold. Main-lining won’t force a plant to stay short or grow tall. Their height is determined by you choosing well-matched strains and keeping up with training/bending your cannabis plants.

Works Best with Medium-to-Tall Strains

When growing cannabis indoors, the best benefits from main-lining come from growing strains that are considered “medium” or “tall” in height. These plants will have a bigger “flowering stretch” and may double or even triple in height after the switch to the flowering stage. This stretch is what creates the long colas of a main-lined plant. With a short plant that doesn’t have much of a flowering stretch, you aren’t going to get those long colas, and may not going to get the most from main-lining, especially compared to the time put in during the vegetative stage building the manifold. For shorter strains, or when growing short plants, other types of plant training like Topping might be better at increasing yields and will take less time in the vegetative stage.

Not the Best Choice for Auto-Flowering Strains of Cannabis

It is difficult to form a full manifold if you try to main-line auto-flowering strains. They do not have much time to recover from any plant training technique that involves cutting the plant. If you want to try out main-lining, it is highly recommended to do so with a photoperiod strain (it is unlikely you’ll ever run into an auto-flowering strain unless you order an autoflowering seed from a seedbank – learn more about autos here – https://www.growweedeasy.com/autoflowering-vs-photoperiod).

Start from Seed if Possible

The main-lining cannabis process is much simpler with plants grown from seed since they usually have symmetrical nodes, unlike clones. If you decide to start main-lining clones, just be aware of the overall structure of the manifold you’re trying to create. Don’t follow these step-by-step instructions for clones since this tutorial was designed for main-lining cannabis grown from seed, but use your judgment to try to create a plant with as similar a structure as possible.

Cannabis strain choice is crucially important for main-lining

Growing Environment

Use Penetrating Grow Lights

Indoor cannabis main-lining seems to get the best results under powerful lights that have deep penetration. With main-lining, you grow long thick colas, and you need a powerful light to fill those colas up with bud. Because lights like CFLs & fluorescent grow lights don’t have much penetration, they aren’t recommended for main-lining. Main-lining performs best with MH/HPS grow lights, CMH/LEC grow lights, or LED grow lights of 150W size or greater. These lights have deep enough penetration to fill the long colas with bud, so they work well with manifolding. With small LEDs, CFLs, or fluorescent grow lights, standard training like topping will be more effective than manifolding at increasing yields and will take less vegetative time.

Maintain the right environment to make sure cannabis plants make the best manifold possible

 

Cannabis Plant Training Tutorial – LST and Topping Technique!

 

Topping Technique

When topping, leave a little part of the old stem above the topping point. This helps reinforce the manifold and prevent any main stems from splitting as they are thickened through the manifold process.

I know this may be hard for those who want to make everything completely even and neat. But leaving a little extra stem will help prevent your “elbows” from splitting.

After the colas are well formed and you have a thick stem and manifold, you’ll be able to see the little mini stems (they won’t have grown at all, while the colas would have thickened coniderably). If they bug you, you can cut them off then. I just leave them on until the end.

Main-lining topping technique diagram

Combine Main-Lining with LST

Main-lining works very well when mixed with LST (low stress training – gentle bending) to hold down plants in the spaces you want. Just remember that after you tie down a part of the plant, it will immediately start turning up and towards the light.

Split Stems

If cannabis plants ever get an open wound or split any part of their stems, make sure to reinforce the injury (if needed) and immediately wrap with electrical tape, duct tape, or even scotch tape. The leaves on the damaged stem may wilt, but if you secure the injury fast enough, life will come back to the leaves. When using this technique, always make sure you check on the injury regularly to make sure the tape isn’t choking the stem.

Use tape as a splint or cast for injured stems

 

How to Secure Cannabis Plants While Main-Lining 

You will need to use a few different tools to secure down your plants at various phases of the manifolding process. These are the tools that have worked best for us. You can use whatever you’d like, but I do warn you not to use anything sharp (like string or thread) as it can start cutting into your plants once they start getting bigger and fighting back. The tools listed below will never run into that problem since they were explicitly made for training plants.

Securing your new colas/tops down

Where to Tie… You can tie your new tops down to anything handy – the sides of your container, net pots, etc. Just make sure that you’re tying your colas to something that moves with the plant. You don’t want to tie to a nearby object, use weights on the ground, etc.

When you move the plant for whatever reason, you want the ties to move with the plant. This prevents accidental cola breakage. Growers almost always end up needing to move their plants for one reason or another during a grow, and it’s just a good practice to make sure the plant and container are self-contained and can be moved without disturbing the LST you are doing.

Avoid Using String

It will work well at first, but it can start digging into the “skin” of your plant as it gets bigger unless you cut them off first. When building a manifold, the stems and stalks will end up getting big, and you want something that will

What Are the Best Ties to Use?

I like using a mix of “plant ties” and “soft wire ties” which are both made for gardening and are more gentle on the plant than string. I recommend using both. The plant ties are good for young plants, and soft wire ties are better for larger plants with strong stems.

Now that you’ve got an idea of what tools you can use to secure your plants in the shape you want, let me walk you through everything.

This plant was secured with plant ties, which were hooked to the edges of the container.

Building a cannabis manifold - gently tie colas down after topping

In the beginning, I use plant ties. The plant ties are very gentle on young stems & they can be easily molded into any shape, allowing you to create hooks to gently move young cannabis stems where you want them. Once you build your manifold, you won’t need these first ties, and they’ll naturally fall off.

1 day later, growth tips have already turned up - manifolding tutorial

Same cannabis plant, but viewed from above

When the plant is responding to training by growing up at the tips, that’s a sign that the main-lining is going well.

The growth tips of a healthy plant grow upwards and towards the light.

At this point, you may start noticing that the base of your two main colas are starting to “beef up” as the plant sends ALL its resources to just those two stems.

The connections between stems start bulging after being topped

The plant is strengthening the connections between the main stem and the new colas, which causes bulging at the base of the colas.

 

More info on…

Plant Ties – young plants

Plant ties are made of thin wire with a plastic coating on the outside. This material usually comes in a long spool so you can cut off as much as you need at a time. The container usually has a built-in cutter so you can quickly get a piece without any other equipment. They tend to be more flimsy than some of the other methods to secure plants – they don’t have a lot of strength. But this is part of what makes them so great – they are very gentle on young plants.

Soft Wire Ties – to anchor stronger stems

When plant ties aren’t strong enough, you can use soft wire ties to hook around colas or anchors, and use plant ties as the “string”. Soft wire ties are made of a thicker wire, with a very soft coating. These are much stronger than the palnt ties, but they will give way to a strong stem and will never cut into the plant. These can be used in situations where strength is needed to hold down a thick unruly cola which wants to grow in the wrong direction. They can also be used as sturdy anchors, with the plant ties above used as “string.”

Plant Yo-Yos – when colas start fattening so much they fall over

These can be hung conveniently from the top of your grow tent, and the special hooks at the bottom are ideal to hold onto thick colas without causing any damage to your buds. When colas start getting too big to hold themselves up, plant yoyos will help you greatly. With this technique, the plant will produce these long dense colas that start falling over under their own weight and are hard to secure with other methods. Plant yo-yos are perfect for gently stringing up colas where you want without damaging buds. In order to use plant yo-yos, you need something to attach to at the top of the grow space (easy with a grow tent, but may need some creativity in other grow spaces).

Ready to start training your plant?

After topping your plant, you use LST (low stress training) to hold the new colas down to make a relatively straight line. LST basically means gently bending your plants to do what you want. Bending the new colas down will keep the manifold short without much effort, and helps with the whole process of getting the plant to produce a great manifold.

Basically, you’re just bending the colas down and away from the center of the plant, and then securing them so they grow in that position.

You got this!

 


 

Jump to…

Nugbuckets’ Main-Lining Tutorial

More Cannabis Plant Training Techniques

Growing Problems & Symptoms

10-Step Quick Start Guide to Growing Cannabis

 


 

This cannabis main-lining tutorial is a work in progress! I (Nebula) did not create “main-lining” and am not the first grower to try main-lining cannabis. Several marijuana growers asked me to put together a main-lining tutorial based on what I’ve learned so far in my setup, so I am sharing my experiences and personal technique for making a cannabis manifold. I hope this information helps other growers!

Main-Lining – Building a Cannabis Manifold
Create a Marijuana Plant with 8+ Big Colas Using a Simple Topping Technique

The technique of “main-lining” or manifolding cannabis was first described and named by a talented grower known as Nugbuckets. Main-Lining (building a manifold) for growing cannabis is a relatively new technique on the grow scene. At least, it’s only recently that cannabis growers have been talking about it by the name “main-lining” or “manifolding.” Chances are growers have been using similar techniques for decades, but only now has it come to be described by this name.

The idea of main-lining using Nugbuckets’ original technique is to build a “manifold” at the base of your cannabis plant to efficiently deliver resources to all colas. During Nugbuckets’ process of building a manifold, the grower chooses to create a plant with usually 8 or 16 colas (8 is most common, 16 for ScrOG setups, and 32 is rarely an efficient use of plant resources). Here’s an example of a Nugbuckets manifold:

Short explanation of cannabis main-lining (building a manifold)

In Nebula’s cannabis manifold tutorial above, she does things just a little bit differently to save time in the vegetative stage, yet while being able to still accomplish the same results as far as increasing bud size and yields!

 

Return to Top of Page